Orange Color Changing Silicone Moisture Absorbent 500g Desiccant 3D Printer Consumables Mobile Phone Electronics Dehumidificatio

Reusable

Reusable by heating or sun exposure 3-4 times recommended

Absorb moisture in the air, lock it in, and achieve drying effect

Name: Orange color changing silicone

Raw material: silicon dioxide

Water content: ≤ 5%

Shelf life: stored under seal for three years

This product is orange before moisture absorption, dark green after moisture absorption saturation, and requires

Replace with a new product or recycle it, which can be reused through the following methods.

Method 1

In sunny and dry weather, place it in the sun for about 3 hours to evaporate the moisture absorbed by the desiccant and restore its performance (this method may cause incomplete color recovery and weak water absorption).

Method 2

Place it in a heatable vessel and heat it in a microwave oven with a temperature controlled between 80 ° C and 100 ° C, or select a medium to low range fire for heating. Due to different brands of microwave ovens and different heating powers, the heating time varies. It is recommended that everyone take it out and observe it every 5 minutes until it returns to orange (pay attention to being hot when the temperature is high after heating).